2016 SANTA CRUZ 5010 CARBON CC X01 27.5
SCROLL DOWN TO SEE MORE HIGH RESOLUTION PICTURES
2016
Size: Extra Large
X01 Build Kit
MSRP $6600
Excellent Condition
5010 is built to serve the most technical backcountry missions. 130mm of VPP® (Virtual Pivot Point) travel produces a shorter chainstay length and lower BB height compared to the 5010’s bigger-travel brethren. This creates a uniquely playful character and an insatiable appetite for negotiating steep, rocky climbs.
And when it’s time to head home, playtime becomes a riot. The new 5010 has a 67-degree head tube angle, more aggressive than before, and the longer top tube welcomes the use of shorter stems for more precise handling and greater confidence on rapid descents. The 5010 also shares all the latest VPP® hardware with the new Bronson. The top-tube-mounted, box-section upper link is a leap forward in durability and stiffness, and the lower link rests cleanly out of the way, dramatically improving clearance and minimizing rock strikes.
BIKE CONDITION
Excellent condition, super clean, shows very minor use/wear.
Frame has no dents, cracks, or any other carbon damage.
Suspension has been inspected and tested and is in perfect condition with no leaks and all adjustments working properly. No scratches on fork stanchions.
Wheels are straight with no hops and no dents in the rims.
The entire bike was just given a full tune up by a professional bike mechanic and everything was inspected and adjusted. Shifting is crisp, the hydraulic brakes are bled and adjusted, and it is clean, tuned, and 100% ready to ride.
Tires: R: Good (approx 50%) F: Excellent
Grips: Excellent
Brake Pads: Excellent
Saddle: Excellent, no tears
COMPONENTS
FRAME
- 130mm VPP™ suspension
- 148mm Rear Axle Spacing
- 27.5" wheels
- Angular contact bearings maximize stiffness
- Bottle cage mount within front triangle fits piggyback shocks
- Collet axle pivots lock in place without pinch bolts
- Double sealed pivots for long bearing life
- Dual grease ports on lower link for easy maintenance
- Forged upper and lower links
- Full carbon dropouts and disk mounts
- Full carbon frame and swingarm
- ISCG05 tabs (carbon frames only)
- Molded rubber swingarm and downtube protection
- Stealth and external seatpost cable routing
- Threaded Bottom Bracket
REAR SHOCK
Fox Float CTD Adjust Kashima Factory Series, rebound, CTD 3 position (climb/trail/descend), 3 position trail adjust, air spring pressure
FORK
Rock Shox Pike RCT3 130mm travel, high and low speed compression adjust, rebound adjust
HEADSET
Cane Creek 40 series
STEM
Race Face Turbine, 60mm, 35mm clamp
HANDLEBARS
Santa Cruz Carbon, 35mm
GRIPS
Santa Cruz lock-on
FRONT BRAKE
SRAM Guide RSC, hydraulic disc, 180mm rotor
REAR BRAKE
SRAM Guide RSC, hydraulic disc, 180mm rotor
REAR DERAILLEUR
SRAM XO 11 speed
SHIFTERS
SRAM XO 11 speed
CASSETTE
SRAM XO 11 speed
CHAIN
SRAM PC1130 11 speed
CRANKSET
Race Face Turbine 175mm
PEDALS
Flat plastic pedals *(included upon request)
HUBS
DT-Swiss 350
RIMS
Easton Arc 24
SPOKES
DT Swiss
FRONT TIRE
Maxxis Minion DHR ll, 3C, tubeless ready, EXO, maxx terra 27.5x2.3"
REAR TIRE
Maxxis Ardent, tubeless ready, EXO, 27.5x2.25"
SADDLE
WTB Silverado, CR-MO rails
SEAT POST
Rock Shox Reverb, 150mm travel, 31.6mm