2016 SANTA CRUZ V10 CARBON C 27.5"
SCROLL DOWN TO SEE MORE HIGH RESOLUTION PICTURES
2016
Size: Large
Excellent Condition
Drawing on feedback from Peat, Minnaar and Bryceland on their personal settings, the 6th generation V10 now offers 216mm / 8.5” of travel in two adjustable geometry positions:
High: 64° headtube angle / 360mm bottom bracket height.
Low: 63.5° headtube angle / 353mm bottom bracket height.
The shock rate has been tuned to be more linear and deliver consistent damping throughout the travel. The new frame benefits from a slightly longer reach to suit evolving rider preferences.
BIKE CONDITION
This V10 is very clean, it shows some wear/use and a few cosmetic scratches but it has been inspected and tuned and is in excellent condition overall and has been well maintained. In addition to a full tune up we also installed a new rear wheel, new chain and brake pads and we did a 50 hour service on the fork and installed new fork seals. It has no mechanical issues and is 100% ready to ride.
Frame has no dents, cracks, or any other carbon damage.
Suspension has been inspected and tested and is in perfect condition with no leaks and all adjustments working properly. Very light scratches on one side of fork stanchions that have been professionally filled and smoothed over.
Wheels are straight with no hops, rear rim has a couple small scratches but the wheel is straight.
The entire bike was just given a full tune up by a professional bike mechanic and everything was inspected and adjusted. Shifting is crisp, the hydraulic brakes are bled and adjusted, and it is clean, tuned, and 100% ready to ride.
Tires: Good
Grips: Good
Brake Pads: New
Saddle: Excellent
COMPONENTS
FRAME
- 157mm rear axle spacing
- 216mm (8.5") VPP suspension
- 27.5" wheels
- Adjustable geometry with HIGH & LOW settings
- Angular contact bearings maximize stiffness
- Collet axle pivots lock in place without pinch bolts
- Double sealed pivots for long bearing life
- Dual grease ports on lower link for easy maintenance
- Full carbon dropouts and disk mounts
- Full carbon frame and swingarm
- Integrated fork bumpers with cable guide
- ISCG-05 tabs for chainguide compatibility
- Molded clip-on chainstay and upright protector
- Molded rubber swingarm and downtube protection
- Threaded Bottom Bracket
REAR SHOCK
Rock Shox Vivid RC2, Coil sprung, compression adjust, rebound adjust
FORK
Rock Shox Boxxer World Cup, air sprung, Charger Damper, Compression Adjust, Rebound Adjust, 200mm travel
HEADSET
Cane Creek 40 series
STEM
Joystick Direct Mount, 45mm, 31.8mm clamp
HANDLEBARS
ENVE Minnaarbar, Carbon, 808mm width 31.8mm clamp
GRIPS
ODI Ruffian lock-on
FRONT BRAKE
SRAM Guide RSC, hydraulic disc, 200mm rotor
REAR BRAKE
SRAM Guide RSC, hydraulic disc, 200mm rotor
REAR DERAILLEUR
SRAM X9 10 speed
SHIFTER
SRAM X9 10 speed
CASSETTE
SRAM 10 speed
CHAIN
SRAM PC1031 10 speed
CRANKSET
Truvativ Descendant 165mm
PEDALS
Flat plastic pedals *(included upon request)
HUBS
Novatec DH42(rear) D541(front)
RIMS
DT-Swiss FR570
SPOKES
DT Swiss
FRONT TIRE
Maxxis Minion DHR ll, DH Casing, Super Tacky, Tubeless 27.5x2.4"
REAR TIRE
Specialized Butcher, DH Casing, Tubeless, 27.5x2.5"
SADDLE
WTB, Cr-Mo rails
SEAT POST
Thompson Elite, 31.6mm