2019 S-WORKS STUMPJUMPER 29" CUSTOM BUILD
SCROLL DOWN TO SEE MORE HIGH RESOLUTION PICTURES
Hope Tech 3 V4 brakes, Ohlins RXF36 fork, gold Absolute Black chainring
We've heard it all before: 'This bike's for going fast, that one's for having fun.' 'This one pedals well, that one shreds.' Why not make one bike that does everything well? Well, we did, and it's called the S-Works Stumpjumper. Unrivaled handling and stiffness, sublime suspension kinematics, and a complete abandon of proprietary nonsense—it rides like a dream. And with 29-inch wheels, you're free to climb and descend at the hyper speed that 29ers are known for.
This S-Works Stumpjumper is a custom build and is in mint condition, easily a 9 out of 10. It was only ridden a few times and shows very minimal wear and everything is in perfect condition.
Frame has no dents, cracks, or any other carbon damage.
Suspension has been inspected and tested and is in perfect condition with no leaks and all adjustments working properly. No scratches on fork stanchions.
Wheels are straight with no hops and no dents in the rims.
The entire bike was just given a full tune up by a professional bike mechanic and everything has been inspected and adjusted. Shifting is precise, the hydraulic brakes are bled and adjusted, and it is clean, tuned, and 100% ready to ride.
Brake Pads: Excellent
Saddle: Excellent, no tears
FACT 11m, full carbon chassis and rear end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 140mm of travel
FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode adjustment, 210x50mm
Ohlins RXF 36
Thomson Elite X4 40mm 31.8mm
Renthal Fatbar riser 780mm 31.8
Odi Elite Pro lock-on
Hope Tech 3 V4 180mm rotors
SRAM XO1 Eagle 12-speed
SRAM XX1 Eagle 12 speed
SRAM XO1 Eagle 12 speed
SRAM XO1 Eagle 12 speed
SRAM DUB XO1 Eagle 170mm 30t w/ absolute black oval chainring
Flat plastic pedals *(included upon request)
(F) Specialized, sealed cartridge bearings, 15x110mm spacing, 24h
(R) DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built
Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
Specialized Phenom Comp
Fox Transfer kashima w/ wolf tooth lever